AF411W
Broadband DSL/Cable Wireless Firewall Router
![](/static/img/no-img.jpg)
The Zero One Technology AF411W router has 11mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It is also known as the Zero One Technology Broadband DSL/Cable Wireless Firewall Router.
Quick links:
Default password/Login
Login instructions
User Manuals
AF411W router specifications (specs)
CPU: n/a
RAM: 4 MiB
Flash: n/a
Custom firmwares: None
WiFi: 11mbps (b)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: 1 x 100mbps port
ETH: 4 x 100mbps ports
USB-ports: 0
Hard reset instructions for Zero One Technology AF411W
If your AF411W router is not working as it should, dropping connections or not
being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your Zero One Technology AF411W in the following way(s):
The 30-30-30 reset
There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
Note: It is worth reading more about
how to reset routers with the 30 30 30 reset and what the risks and
considerations
are when resetting your router this way, instead of just rebooting it.
Default factory settings for Zero One Technology AF411W
If you have performed a reset of your AF411W device or not changed the defaults, you should be able to access it with the following settings:
Default username: admin
Default password: 0000
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
How to login to the AF411W
To login to the Broadband DSL/Cable Wireless Firewall Router and change the settings, you can follow these steps:
- Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
- Open your browser and visit http://192.168.1.1
- You should be prompted with a login dialogue.
-
Enter the username:
admin
and the password0000
Note: If you have already changed the password use that instead. - You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.
If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Zero One Technology credentials, as they can usually be shared across models/variants.
Report error on page
(If info is incorrect)