EdgeRouter PoE (ERPoe-5)

The Ubiquiti Networks EdgeRouter PoE (ERPoe-5) router has No WiFi, 3 N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
Login instructions

EdgeRouter PoE (ERPoe-5) router specifications (specs)

Hard reset instructions for Ubiquiti Networks EdgeRouter PoE (ERPoe-5)

If your EdgeRouter PoE (ERPoe-5) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Ubiquiti Networks EdgeRouter PoE (ERPoe-5) in the following way(s):

The 30-30-30 reset

1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Ubiquiti Networks EdgeRouter PoE (ERPoe-5)

How to login to the EdgeRouter PoE (ERPoe-5)

To login to the EdgeRouter PoE (ERPoe-5) router and change the settings, you can follow these steps:

1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
2. Open your browser and visit http://192.168.1.1
3. You should be prompted with a login dialogue.
4. Enter the username: ubnt and the password ubnt
   Note: If you have already changed the password use that instead.
5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Ubiquiti Networks credentials, as they can usually be shared across models/variants.

Similar routers