EdgeRouter 10X
10-Port High-Performance Gigabit Router with PoE Flexibility

The Ubiquiti Networks EdgeRouter 10X router has No WiFi, 1 N/A ETH-ports and 0 USB-ports.
It is also known as the Ubiquiti Networks 10-Port High-Performance Gigabit Router with PoE Flexibility.

EdgeRouter 10X router specifications (specs)

Ubiquiti Networks EdgeRouter review (quick overview)

Here is the quick comparison of how the Ubiquiti Networks EdgeRouter compares to other routers on our site:

Hard reset instructions for Ubiquiti Networks EdgeRouter 10X

If your EdgeRouter 10X router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Ubiquiti Networks EdgeRouter 10X in the following way(s):

The 30-30-30 reset

1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Ubiquiti Networks EdgeRouter 10X

How to login to the EdgeRouter 10X

To login to the 10-Port High-Performance Gigabit Router with PoE Flexibility and change the settings, you can follow these steps:

1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
2. Open your browser and visit http://192.168.1.1
3. You should be prompted with a login dialogue.
4. Enter the username: ubnt and the password ubnt
   Note: If you have already changed the password use that instead.
5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Ubiquiti Networks credentials, as they can usually be shared across models/variants.

Similar routers

Motorola SURFboard SB6141

CM820A

F5D4085

InfiniTV 6 ETH

DPC3000

DPC3008