FH1202
High Power Wireless AC1200 Dual-band Router

Thumbnail for the Tenda FH1202 router with Gigabit WiFi, 3 100mbps ETH-ports and
0 USB-ports

The Tenda FH1202 router has Gigabit WiFi, 3 100mbps ETH-ports and 0 USB-ports.
It is also known as the Tenda High Power Wireless AC1200 Dual-band Router.

Quick links:
Default password/Login
User Manuals

FH1202 router specifications (specs)

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 x 100mbps port
ETH: 3 x 100mbps ports
USB-ports: 0

Hard reset instructions for Tenda FH1202

If your FH1202 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Tenda FH1202 in the following way(s):

Through the web interface

Open your web browser and go to routers web interface (check default settings below)
Sign in with your username/password or check default settings below
Once logged in to the interface locate System tools and click it
Under System tools locate Restore to factory and click it
On the resulting page click the Restore button, click Ok if prompted
Wait for the reboot progress to finalize

With the reset button

Have the power plugged in and powered on
Locate the Reset/WPS button on your router
With a sharp object (e.g. paperclip) press and hold the button for 7 seconds
When the SYS light stops blinking, release the reset button.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Tenda FH1202

If you have performed a reset of your FH1202 device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.0.1 Tenda login instructions
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.