WLR-7100
Wireless AC1200 Gigabit Dual-Band Router X7

Name: WLR-7100
Brand: Sitecom
Rating: 38 (3 reviews)

Thumbnail for the Sitecom WLR-7100 router with Gigabit WiFi, 4 N/A ETH-ports and
0 USB-ports

The Sitecom WLR-7100 router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the Sitecom Wireless AC1200 Gigabit Dual-Band Router X7.

Quick links:
Default password/Login
Login instructions

WLR-7100 router specifications (specs)

System specs
CPU: n/a
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: n/a
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 4 x N/A ports
USB-ports: 0

Sitecom WLR-7100 review (quick overview)

Here is the quick comparison of how the Sitecom WLR-7100 compares to other routers on our site:

Average 38/100

Editor 92/100

WiFi 20/100

Hardware 4/100

Current price Find best price

For a full list of routers and how they compare to the WLR-7100, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Sitecom WLR-7100

If your WLR-7100 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Sitecom WLR-7100 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Sitecom WLR-7100

If you have performed a reset of your WLR-7100 device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.0.1 Sitecom login instructions
Default username: admin Sitecom router default password list
Default password: ''randomly generated''
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

To login to the Wireless AC1200 Gigabit Dual-Band Router X7 and change the settings, you can follow these steps:

Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
Open your browser and visit http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: admin and the password ''randomly generated''
Note: If you have already changed the password use that instead.
You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Sitecom credentials, as they can usually be shared across models/variants.