WREX
Wi-Fi Repeater Extender

Name: WREX
Brand: Honeywell
Rating: 26 (3 reviews)

Thumbnail for the Honeywell WREX router with 300mbps WiFi, 1 100mbps ETH-ports and
0 USB-ports

The Honeywell WREX router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the Honeywell Wi-Fi Repeater Extender.

Quick links:
Default password/Login
User Manuals

WREX router specifications (specs)

System specs
CPU: n/a
RAM: 64 MiB
Flash: n/a
Custom firmwares: None

Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: 1 x 100mbps port
USB-ports: 0

Honeywell WREX review (quick overview)

Here is the quick comparison of how the Honeywell WREX compares to other routers on our site:

Average 26/100

Editor 70/100

WiFi 6/100

Hardware 3/100

Current price Find best price

For a full list of routers and how they compare to the WREX, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Honeywell WREX

If your WREX router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Honeywell WREX in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Honeywell WREX

If you have performed a reset of your WREX device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.0.254 Honeywell login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.254
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.