FON2501A
Wireless Dual-Band Router
The Fon Wireless FON2501A router has 300mbps WiFi, 2 100mbps ETH-ports and 0 USB-ports.
It is also known as the Fon Wireless Wireless Dual-Band Router.
Quick links:
Default password/Login
User Manuals
FON2501A router specifications (specs)
CPU: 530 MHz
RAM: 64Ā MiB
Flash: 8Ā MiB
Custom firmwares: None
WiFi: 300mbps (abgn)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 x 100mbps port
ETH: 2 x 100mbps ports
USB-ports: 0
Hard reset instructions for Fon Wireless FON2501A
If your FON2501A router is not working as it should, dropping connections or not
being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your Fon Wireless FON2501A in the following way(s):
The 30-30-30 reset
There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
Note: It is worth reading more about
how to reset routers with the 30 30 30 reset and what the risks and
considerations
are when resetting your router this way, instead of just rebooting it.
Default factory settings for Fon Wireless FON2501A
If you have performed a reset of your FON2501A device or not changed the defaults, you should be able to access it with the following settings:
Default password: adminĀ
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.10.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
Report error on page
(If info is incorrect)
