1. Home
  2. Info
  3. EnGenius
  4. EWS377AP

EWS377AP
802.11ax 4x4 Managed Indoor Wireless Access Point

Thumbnail for the EnGenius EWS377AP router with Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports Full size picture

The EnGenius EWS377AP router has Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports.
It is also known as the EnGenius 802.11ax 4x4 Managed Indoor Wireless Access Point.

The EWS377AP is featured in our
Best Mid- to high-end routers: buying guide

Quick links:
Default password/Login


EWS377AP router specifications (specs)

System specs
CPU: 2.0 GHz
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac+ax)
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: 1 x N/A port
USB-ports: 0

EnGenius EWS377AP review (quick overview)

Here is the quick comparison of how the EnGenius EWS377AP compares to other routers on our site:

Average 73/100
Editor 86/100
WiFi 100/100
Hardware 34/100
Current price $111.76

For a full list of routers and how they compare to the EWS377AP, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for EnGenius EWS377AP

If your EWS377AP router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your EnGenius EWS377AP in the following way(s):

Through the web interface

  1. Open a web browser and go to the address of the router (check default settings below)
  2. Sign in with your username/password, if unchanged check default settings below
  3. Locate Management in the menu and click it
  4. Click on Configure
  5. On the Configure page click on the Reset button, if prompted click Ok
  6. Wait for router to reboot

With the reset button

  1. Have the router plugged in and turned on
  2. Locate the reset button (it's usually labeled reset or RESET/WPS)
  3. With a sharp object, for example a paperclip, press and hold the reset button for at least 11 seconds
  4. When the POWER led starts blinking release the reset button
  5. Wait for the router to reboot.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for EnGenius EWS377AP

If you have performed a reset of your EWS377AP device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

Similar routers

The Cisco Meraki MR45 router with Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports
Meraki MR45
The Cisco C9115AXI-B router with Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports
C9115AXI-B


Report error on page
(If info is incorrect)