ESR600H
Xtra Range Dual Band N600 Gigabit Router

The EnGenius ESR600H router has 300mbps WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the EnGenius Xtra Range Dual Band N600 Gigabit Router.

Quick links:
Default password/Login
Login instructions
User Manuals

ESR600H router specifications (specs)

EnGenius ESR600 review (quick overview)

Here is the quick comparison of how the EnGenius ESR600 compares to other routers on our site:

Hard reset instructions for EnGenius ESR600H

If your ESR600H router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your EnGenius ESR600H in the following way(s):

Through the web interface

1. Open a web browser and go to the address of the router (check default settings below)
2. Sign in with your username/password, if unchanged check default settings below
3. Locate Management in the menu and click it
4. Click on Configure
5. On the Configure page click on the Reset button, if prompted click Ok
6. Wait for router to reboot

With the reset button

1. Have the router plugged in and turned on
2. Locate the reset button (it's usually labeled reset or RESET/WPS)
3. With a sharp object, for example a paperclip, press and hold the reset button for at least 11 seconds
4. When the POWER led starts blinking release the reset button
5. Wait for the router to reboot.

The 30-30-30 reset

1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for EnGenius ESR600H

How to login to the ESR600H

To login to the Xtra Range Dual Band N600 Gigabit Router and change the settings, you can follow these steps:

1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
2. Open your browser and visit http://192.168.0.1
3. You should be prompted with a login dialogue.
4. Enter the username: admin and the password admin
   Note: If you have already changed the password use that instead.
5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common EnGenius credentials, as they can usually be shared across models/variants.

Similar routers

ESR750H

CDW68AAM-U01

ESR7750G

RT-N56U

HD45R

RT-N56U B1