EMR5000

The EnGenius EMR5000 router has Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals

EMR5000 router specifications (specs)

System specs
CPU: 716 MHz
RAM: n/a
Flash: n/a
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 1 x N/A port
USB-ports: 0

Hard reset instructions for EnGenius EMR5000

If your EMR5000 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your EnGenius EMR5000 in the following way(s):

Through the web interface

Open a web browser and go to the address of the router (check default settings below)
Sign in with your username/password, if unchanged check default settings below
Locate Management in the menu and click it
Click on Configure
On the Configure page click on the Reset button, if prompted click Ok
Wait for router to reboot

With the reset button

Have the router plugged in and turned on
Locate the reset button (it's usually labeled reset or RESET/WPS)
With a sharp object, for example a paperclip, press and hold the reset button for at least 11 seconds
When the POWER led starts blinking release the reset button
Wait for the router to reboot.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for EnGenius EMR5000

If you have performed a reset of your EMR5000 device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): EMRSetupXYXYXYXYXYXY
Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.