F9K1112

Name: F9K1112
Brand: Belkin
Rating: 34 (3 reviews)

Thumbnail for the Belkin F9K1112 router with Gigabit WiFi, 4 N/A ETH-ports and
0 USB-ports

The Belkin F9K1112 router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1000 Mpbs.

Quick links:
Default password/Login
User Manuals

F9K1112 router specifications (specs)

System specs
CPU: n/a
RAM: 128 MiB
Flash: n/a
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: 1000 Mpbs
WAN: 1 x N/A port
ETH: 4 x N/A ports
USB-ports: 0

Belkin F9K1112 review (quick overview)

Here is the quick comparison of how the Belkin F9K1112 compares to other routers on our site:

Average 34/100

Editor 77/100

WiFi 20/100

Hardware 5/100

Current price Find best price

For a full list of routers and how they compare to the F9K1112, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Belkin F9K1112

If your F9K1112 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Belkin F9K1112 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Belkin F9K1112

If you have performed a reset of your F9K1112 device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

F9K1112 Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin F9K1112:

Belkin stock firmware for the F9K1112

Stock firmwares for the F9K1112 are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.