Smart Hub 2

The BT Smart Hub 2 router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.

The Smart Hub 2 is featured in our
Best Low-end routers: buying guide

Quick links:
Default password/Login
Login instructions

Smart Hub 2 router specifications (specs)

System specs
CPU: 1 GHz
RAM: 256 MiB
Flash: 256 MiB
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: 4 x N/A ports
USB-ports: 0

BT Smart Hub review (quick overview)

Here is the quick comparison of how the BT Smart Hub compares to other routers on our site:

Average 55/100

Editor 88/100

WiFi 20/100

Hardware 58/100

Current price Find best price

For a full list of routers and how they compare to the Smart Hub 2, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for BT Smart Hub 2

If your Smart Hub 2 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your BT Smart Hub 2 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for BT Smart Hub 2

If you have performed a reset of your Smart Hub 2 device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.1.254 BT login instructions
Default username: admin BT router default password list
Default password: ''randomly generated''
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.254
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

To login to the Smart Hub 2 router and change the settings, you can follow these steps:

Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
Open your browser and visit http://192.168.1.254
You should be prompted with a login dialogue.
Enter the username: admin and the password ''randomly generated''
Note: If you have already changed the password use that instead.
You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common BT credentials, as they can usually be shared across models/variants.

Smart Hub 2 Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the BT Smart Hub 2:

BT stock firmware for the Smart Hub 2

Stock firmwares for the Smart Hub 2 are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.