RTA2600
ATHENA - High Power AC2600 Wi-Fi Router with MU-MIMO
The Amped Wireless RTA2600 router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2600 Mpbs.
It is also known as the Amped Wireless ATHENA - High Power AC2600 Wi-Fi Router with MU-MIMO.
Best Low-end routers: buying guide
Quick links:
Default password/Login
User Manuals
RTA2600 router specifications (specs)
CPU: 1.4 GHz
RAM: 512 MiB
Flash: 128 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: 2600 Mpbs
WAN: 1 x N/A port
ETH: 4 x N/A ports
USB-ports: 0
Amped Wireless RTA2600 review (quick overview)
Here is the quick comparison of how the Amped Wireless RTA2600 compares to other routers on our site:
For a full list of routers and how they compare to the RTA2600, check the Router Buying Guide which will help you buy the most price-competitive router.
Hard reset instructions for Amped Wireless RTA2600
If your RTA2600 router is not working as it should, dropping connections or not
being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your Amped Wireless RTA2600 in the following way(s):
The 30-30-30 reset
There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
If that doesn't work be sure to check out the
questions and answers
incase someone else has had similar problems resetting their router.
Note: It is worth reading more about
how to reset routers with the 30 30 30 reset and what the risks and
considerations
are when resetting your router this way, instead of just rebooting it.
Default factory settings for Amped Wireless RTA2600
If you have performed a reset of your RTA2600 device or not changed the defaults, you should be able to access it with the following settings:
Default Gateway IP: 192.168.3.1 Amped Wireless login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.3.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
Report error on page
(If info is incorrect)