RE2200T
High Power AC2200 Wi-Fi Range Extender

Thumbnail for the Amped Wireless RE2200T router with Gigabit WiFi, 5 N/A ETH-ports and
0 USB-ports

The Amped Wireless RE2200T router has Gigabit WiFi, 5 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2200 Mpbs.
It is also known as the Amped Wireless High Power AC2200 Wi-Fi Range Extender.

Quick links:
Default password/Login

RE2200T router specifications (specs)

System specs
CPU: 717 MHz
RAM: 256 MiB
Flash: n/a
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: 2200 Mpbs
WAN: None
ETH: 5 x N/A ports
USB-ports: 0

Hard reset instructions for Amped Wireless RE2200T

If your RE2200T router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Amped Wireless RE2200T in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Amped Wireless RE2200T

If you have performed a reset of your RE2200T device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): Amped_Helios_2.4,Amped_Helios_5.0
Default Gateway IP: 192.168.3.1 Amped Wireless login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.3.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

RE2200T Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Amped Wireless RE2200T:

Amped Wireless stock firmware for the RE2200T

Stock firmwares for the RE2200T are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.