BR-6774AD
AD7200 WLAN Concurrent Tri-Band Gigabit Router
The Acelink BR-6774AD router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 7200 Mpbs.
It is also known as the Acelink AD7200 WLAN Concurrent Tri-Band Gigabit Router.
Quick links:
Default password/Login
Login instructions
BR-6774AD router specifications (specs)
CPU: 1.7 GHz
RAM: 512 MiB
Flash: 128 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac+ad)
WiFi bands: n/a
WiFi throughput: 7200 Mpbs
WAN: 1 x N/A port
ETH: 4 x N/A ports
USB-ports: 0
Hard reset instructions for Acelink BR-6774AD
If your BR-6774AD router is not working as it should, dropping connections or not
being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your Acelink BR-6774AD in the following way(s):
The 30-30-30 reset
There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
Note: It is worth reading more about
how to reset routers with the 30 30 30 reset and what the risks and
considerations
are when resetting your router this way, instead of just rebooting it.
Default factory settings for Acelink BR-6774AD
If you have performed a reset of your BR-6774AD device or not changed the defaults, you should be able to access it with the following settings:
Default username: admin
Default password: adminĀ
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
How to login to the BR-6774AD
To login to the AD7200 WLAN Concurrent Tri-Band Gigabit Router and change the settings, you can follow these steps:
- Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
- Open your browser and visit http://192.168.1.1
- You should be prompted with a login dialogue.
-
Enter the username:
adminand the passwordadmin
Note: If you have already changed the password use that instead. - You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.
If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Acelink credentials, as they can usually be shared across models/variants.
Report error on page
(If info is incorrect)
