GT-AX6000 v2

The ASUS GT-AX6000 v2 router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.

The GT-AX6000 v2 is featured in our
Best Ultra high-end routers: buying guide

Quick links:
Default password/Login



GT-AX6000 v2 router specifications (specs)

System specs
CPU: 2.0 GHz
RAM: 1,024 MiB
Flash: 256 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac+ax)
WiFi bands: n/a
WiFi throughput: n/a
WAN: 2 x N/A ports
ETH: 4 x N/A ports
USB-ports: 0

ASUS GT-AX6000 review (quick overview)

Here is the quick comparison of how the ASUS GT-AX6000 compares to other routers on our site:

Average 93/100
Editor 80/100
WiFi 100/100
Hardware 100/100
Current price Find best price

For a full list of routers and how they compare to the GT-AX6000 v2, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for ASUS GT-AX6000 v2

If your GT-AX6000 v2 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your ASUS GT-AX6000 v2 in the following way(s):

Through the web-interface

  1. Open your browser and navigate to the default gateway ip (check default settings below)
  2. Sign in to the web-interface with the username and password you have selected, or try the defaulr username and password (check default settings below)
  3. Under the advanced settings menu, select administration
  4. Find the link "Restore/Save/Upload Setting"
  5. Beside Factory default click on Restore
  6. If prompted, click ok

With the reset button on the router

  1. Locate the reset button on the backside of your unit
  2. with a sharp object, e.g. a paperclip or pencil, press and hold the reset button for 5s or until the power led starts flashing

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for ASUS GT-AX6000 v2

If you have performed a reset of your GT-AX6000 v2 device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.



Report error on page
(If info is incorrect)