TV Live Hub
The Western Digital TV Live Hub router has No WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
Quick links:
Default password/Login
TV Live Hub router specifications (specs)
CPU: n/a
RAM: 256 MiB
Flash: 256 MiB
Custom firmwares: None
WiFi: No ()
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: 1 x Gigabit port
USB-ports: 0
Western Digital TV review (quick overview)
Here is the quick comparison of how the Western Digital TV compares to other routers on our site:
For a full list of routers and how they compare to the TV Live Hub, check the Router Buying Guide which will help you buy the most price-competitive router.
Hard reset instructions for Western Digital TV Live Hub
If your TV Live Hub router is not working as it should, dropping connections or not
being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your Western Digital TV Live Hub in the following way(s):
The 30-30-30 reset
There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
If that doesn't work be sure to check out the
questions and answers
incase someone else has had similar problems resetting their router.
Note: It is worth reading more about
how to reset routers with the 30 30 30 reset and what the risks and
considerations
are when resetting your router this way, instead of just rebooting it.
Default factory settings for Western Digital TV Live Hub
If you have performed a reset of your TV Live Hub device or not changed the defaults, you should be able to access it with the following settings:
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
TV Live Hub Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Western Digital TV Live Hub:
Western Digital stock firmware for the TV Live Hub
Stock firmwares for the TV Live Hub are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.
Report error on page
(If info is incorrect)
