3G150S

The Tenda 3G150S router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals

3G150S router specifications (specs)

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None

Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: 1 x 100mbps port
USB-ports: 0

Hard reset instructions for Tenda 3G150S

If your 3G150S router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Tenda 3G150S in the following way(s):

Through the web interface

Open your web browser and go to routers web interface (check default settings below)
Sign in with your username/password or check default settings below
Once logged in to the interface locate System tools and click it
Under System tools locate Restore to factory and click it
On the resulting page click the Restore button, click Ok if prompted
Wait for the reboot progress to finalize

With the reset button

Have the power plugged in and powered on
Locate the Reset/WPS button on your router
With a sharp object (e.g. paperclip) press and hold the button for 7 seconds
When the SYS light stops blinking, release the reset button.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Tenda 3G150S

If you have performed a reset of your 3G150S device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.2.1 Tenda login instructions
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.2.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.