RE370K
AC1200 Wi-Fi Range Extender with Smart Plug

Name: RE370K
Brand: TP-LINK
Price: 24.95 USD
Availability: InStock
Rating: 33 (3 reviews)

Thumbnail for the TP-LINK RE370K router with Gigabit WiFi, 1 N/A ETH-ports and
0 USB-ports

The TP-LINK RE370K router has Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports.
It is also known as the TP-LINK AC1200 Wi-Fi Range Extender with Smart Plug.

Quick links:
Default password/Login
User Manuals

RE370K router specifications (specs)

System specs
CPU: n/a
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: None
ETH: 1 x N/A port
USB-ports: 0

TP-LINK RE370K review (quick overview)

Here is the quick comparison of how the TP-LINK RE370K compares to other routers on our site:

Average 33/100

Editor 76/100

WiFi 20/100

Hardware 4/100

Current price $24.95

For a full list of routers and how they compare to the RE370K, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for TP-LINK RE370K

If your RE370K router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your TP-LINK RE370K in the following way(s):

Through the web interface

Open a browser and navigate to the web interface of the router (check default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.

Withe the RESET/WPS button

Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for TP-LINK RE370K

If you have performed a reset of your RE370K device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): TP-LINK_2G_EXT,TP-LINK_5G_EXT
Default username: admin TP-LINK router default password list
Default password: admin
Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

RE370K Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TP-LINK RE370K:

TP-LINK stock firmware for the RE370K

Stock firmwares for the RE370K are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.