RouterBOARD 4011 (RB4011iGS+RM)

Name: RouterBOARD 4011 (RB4011iGS+RM)
Brand: MikroTik
Rating: 62 (3 reviews)

The MikroTik RouterBOARD 4011 (RB4011iGS+RM) router has No WiFi, 8 N/A ETH-ports and 0 USB-ports.

The RouterBOARD 4011 (RB4011iGS+RM) is featured in our
Best Mid-end routers: buying guide

Quick links:
Default password/Login
Login instructions

RouterBOARD 4011 (RB4011iGS+RM) router specifications (specs)

System specs
CPU: 1.4 GHz
RAM: 1,024 MiB
Flash: 512 MiB + 1 MiB
Custom firmwares: None

Connectivity
WiFi: No ()
WiFi bands: n/a
WiFi throughput: n/a
WAN: 2 x N/A ports
ETH: 8 x N/A ports
USB-ports: 0

MikroTik RouterBOARD 4011 review (quick overview)

Here is the quick comparison of how the MikroTik RouterBOARD 4011 compares to other routers on our site:

Average 62/100

Editor 94/100

WiFi 2/100

Hardware 90/100

Current price Find best price

For a full list of routers and how they compare to the RouterBOARD 4011 (RB4011iGS+RM), check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for MikroTik RouterBOARD 4011 (RB4011iGS+RM)

If your RouterBOARD 4011 (RB4011iGS+RM) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your MikroTik RouterBOARD 4011 (RB4011iGS+RM) in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for MikroTik RouterBOARD 4011 (RB4011iGS+RM)

If you have performed a reset of your RouterBOARD 4011 (RB4011iGS+RM) device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.88.1 MikroTik login instructions
Default username: admin MikroTik router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.88.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

To login to the RouterBOARD 4011 (RB4011iGS+RM) router and change the settings, you can follow these steps:

Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
Open your browser and visit http://192.168.88.1
You should be prompted with a login dialogue.
Enter the username: admin and if it requires a password, leave it empty or try with admin/password
Note: If you have already changed the password use that instead.
You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common MikroTik credentials, as they can usually be shared across models/variants.