Squeezebox Radio
Logitech Squeezebox Radio WiFi Internet Radio
The Logitech Squeezebox Radio router has 54mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the Logitech Logitech Squeezebox Radio WiFi Internet Radio.
Quick links:
Default password/Login
Login instructions
User Manuals
Squeezebox Radio router specifications (specs)
CPU: 400 MHz
RAM: 64 MiB
Flash: 128 MiB
Custom firmwares: None
WiFi: 54mbps (bg)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: 1 x 100mbps port
USB-ports: 0
Hard reset instructions for Logitech Squeezebox Radio
If your Squeezebox Radio router is not working as it should, dropping connections or not
being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your Logitech Squeezebox Radio in the following way(s):
The 30-30-30 reset
There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
Note: It is worth reading more about
how to reset routers with the 30 30 30 reset and what the risks and
considerations
are when resetting your router this way, instead of just rebooting it.
Default factory settings for Logitech Squeezebox Radio
If you have performed a reset of your Squeezebox Radio device or not changed the defaults, you should be able to access it with the following settings:
Default username: root
Default password: 1234
Default subnet mask: 255.255.255.0
Default DNS server: acquired via DHCP
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
How to login to the Squeezebox Radio
To login to the Logitech Squeezebox Radio WiFi Internet Radio and change the settings, you can follow these steps:
- Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
- Find out your routers IP address with the WhatsMyRouterIp.com IP finder
- Type the router IP in the browser address field and press enter, e.g. http://192.168.0.1
- You should be prompted with a login dialogue.
-
Enter the username:
root
and the password1234
Note: If you have already changed the password use that instead. - You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.
If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Logitech credentials, as they can usually be shared across models/variants.
Squeezebox Radio Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Logitech Squeezebox Radio:
Logitech stock firmware for the Squeezebox Radio
Stock firmwares for the Squeezebox Radio are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.
Report error on page
(If info is incorrect)