Ci20

The Creator Ci20 router has 300mbps WiFi, 100mbps ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
Login instructions
User Manuals

Ci20 router specifications (specs)

System specs
CPU: 1.2 GHz
RAM: 1024 MiB
Flash: 8192 MiB
Custom firmwares: None

Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: None
USB-ports: 0

Hard reset instructions for Creator Ci20

If your Ci20 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Creator Ci20 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Creator Ci20

If you have performed a reset of your Ci20 device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: acquired via DHCP Creator login instructions
Default username: ci20
Default password: ci20
Default subnet mask: 255.255.255.0
Default DNS server: acquired via DHCP
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

To login to the Ci20 router and change the settings, you can follow these steps:

Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
Find out your routers IP address with the WhatsMyRouterIp.com IP finder
Type the router IP in the browser address field and press enter, e.g. http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: ci20 and the password ci20
Note: If you have already changed the password use that instead.
You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Creator credentials, as they can usually be shared across models/variants.