SRT-AC1900 (OnHub)

The ASUS SRT-AC1900 (OnHub) router has Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals

SRT-AC1900 (OnHub) router specifications (specs)

System specs
CPU: 1.4 GHz
RAM: 1024 MiB
Flash: 4096 MiB + 8 MiB
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 1 x N/A port
USB-ports: 0

Hard reset instructions for ASUS SRT-AC1900 (OnHub)

If your SRT-AC1900 (OnHub) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your ASUS SRT-AC1900 (OnHub) in the following way(s):

Through the web-interface

Open your browser and navigate to the default gateway ip (check default settings below)
Sign in to the web-interface with the username and password you have selected, or try the defaulr username and password (check default settings below)
Under the advanced settings menu, select administration
Find the link "Restore/Save/Upload Setting"
Beside Factory default click on Restore
If prompted, click ok

With the reset button on the router

Locate the reset button on the backside of your unit
with a sharp object, e.g. a paperclip or pencil, press and hold the reset button for 5s or until the power led starts flashing

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for ASUS SRT-AC1900 (OnHub)

If you have performed a reset of your SRT-AC1900 (OnHub) device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.