1. Home
  2. Router Login Instructions
  3. Global Sun

Global Sun Login Instructions
How To Login to a Global Sun Router And Access The Setup Page

The Global Sun router web interface is the control panel for your router it's where all the settings are stored and changed. To make changes to your network you'll need to login to your Global Sun router.

Requirements to access the Global Sun web interface

Accessing the Global Sun web interface is pretty straightforward and all you'll need is:

  • Global Sun router
  • Access to the network, Either through LAN-cable or through Wi-Fi
  • A web browser, which you clearly have.

Following are the instructions to connect to your Global Sun router's interface for configuration and diagnotstics.

1. Make sure you are connected to your Global Sun router

To be able to reach the setup pages of your Global Sun router, you'll need to be connected to its network.
So start by connecting to the network, either through WiFi or through ethernet cable.

Tip: If you don't know the WiFi password for your Global Sun router, you can always connect to it with an ethernernet cable, which won't require a password.

2. Open your web browser and navigate to 192.168.1.1

Open your browser and type the router's IP address into the address field. The most common IP for Global Sun routers is: 192.168.1.1 If that IP address doesn't work, you can search the default Global Sun IP address list for your specific model.

Tip: Since you're already connected to your Global Sun router, you can also use whatsmyrouterip.com to quickly find the IP. It is the "Router Private IP"-value.
192.168.1.1
Type the IP into the address field and press go

3. Enter the username and password for your Global Sun router

In the username and password field, enter your current username and password and press enter / sign in.

Default login credentials for Global Sun

If you're not sure about the username/password you can look at the default Global Sun credentials to see what the defaults are, and how to reset to them.
- The credentials can also be printed on the label on the back of your router.


That's it! You can now configure anything you want on the device.


How to configure your Global Sun router

Once you have logged in to the Global Sun admin interface you should be able to change any settings that are available.
Be careful when you configure your router so that you don't break the network.

Tip: write down your current settings before changing anything so that you can revert it incase of trouble.

What if my Global Sun router or network stops working after a configuration change

In case you by mistake make some change that breaks your Global Sun home network, you can always go back to zero by following the generic 30 30 30 hard reset trick.

This is usually the last resort, and if you still have access to the Global Sun interface you can always login to try and revert the settings first (This of course assumes you wrote down the original value before changing it).