RT-AC87U
Dual-band Wireless-AC2400 Gigabit Router

The ASUS RT-AC87U router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2400 Mpbs.
It is also known as the ASUS Dual-band Wireless-AC2400 Gigabit Router.

RT-AC87U router specifications (specs)

ASUS RT-AC87 review (quick overview)

Here is the quick comparison of how the ASUS RT-AC87 compares to other routers on our site:

Hard reset instructions for ASUS RT-AC87U

If your RT-AC87U router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your ASUS RT-AC87U in the following way(s):

Through the web-interface

1. Open your browser and navigate to the default gateway ip (check default settings below)
2. Sign in to the web-interface with the username and password you have selected, or try the defaulr username and password (check default settings below)
3. Under the advanced settings menu, select administration
4. Find the link "Restore/Save/Upload Setting"
5. Beside Factory default click on Restore
6. If prompted, click ok

With the reset button on the router

1. Locate the reset button on the backside of your unit
2. with a sharp object, e.g. a paperclip or pencil, press and hold the reset button for 5s or until the power led starts flashing

The 30-30-30 reset

1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for ASUS RT-AC87U

How to login to the RT-AC87U

To login to the Dual-band Wireless-AC2400 Gigabit Router and change the settings, you can follow these steps:

1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
2. Open your browser and visit http://192.168.1.1
3. You should be prompted with a login dialogue.
4. Enter the username: admin and the password admin
   Note: If you have already changed the password use that instead.
5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common ASUS credentials, as they can usually be shared across models/variants.

RT-AC87U Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the ASUS RT-AC87U:

ASUS stock firmware for the RT-AC87U

Stock firmwares for the RT-AC87U are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.

Similar routers

Home Hub 5A

AC1200R

F9K1113 v1

G10

F9K1113 v2

4G-AC55U