SerComm Default Usernames & Passwords
The default credentials needed to login to your SerComm router
Info updated Dec. 4, 2024
The majority of SerComm routers have a default username of admin, a default password of password, and the default IP address of 192.168.0.1.
These SerComm credentials are needed when doing a login to the SerComm router's web interface to change any settings.
Since some of the models don't follow the standards, you can see those in the table below.
Below the table are also instructions on what to do incase you forget your SerComm router password, need to reset your SerComm router to its factory default password, or the password reset doesn't work.
Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.SerComm default Password List (Valid December 2024)
| Model | Default Username | Default Password | Default IP address |
|
AP221AI AP221AI default factory settings |
admin | password | 192.168.0.228 |
|
AP51DA AP51DA default factory settings |
admin | password | 192.168.0.228 |
|
H500-s H500-s default factory settings |
admin | VF-ESVodafone-H-500-s | 192.168.0.1 |
|
IP1006GA/GB IP1006GA/GB default factory settings |
admin | password | 192.168.0.1 |
|
IP1006RR IP1006RR default factory settings |
admin | password | 192.168.0.1 |
|
IP1006SR IP1006SR default factory settings |
admin | password | 192.168.0.1 |
|
IP806GA/GB v1 IP806GA/GB v1 default factory settings |
admin | password | 192.168.0.1 |
|
IP806GA/GB v2 IP806GA/GB v2 default factory settings |
admin | password | 192.168.0.1 |
|
IP806GA/GB v3 IP806GA/GB v3 default factory settings |
admin | password | 192.168.0.1 |
|
IP806GA/GB v4 IP806GA/GB v4 default factory settings |
admin | password | 192.168.0.1 |
|
|
|||
|
IP822LM IP822LM default factory settings |
admin | - | 192.168.0.101 |
|
RV6699 v2 RV6699 v2 default factory settings |
admin | none | 192.168.0.1 |
|
VD625 VD625 default factory settings |
admin | admin | 192.168.1.1 |
|
WD300 WD300 default factory settings |
admin | admin | 192.168.1.1 |
Instructions and common questions
Forgot your SerComm router password?
Have you changed the username and/or password of your SerComm router and forgotten what you changed it to?
Don't worry: all SerComm routers come with a default factory set password that you can revert to by following the instructions below.
Reset SerComm router to default password
If you decide to revert your SerComm router to it's factory defaults, you should do the 30-30-30 reset as follows:
- When your SerComm router is powered on, press and hold the reset button for 30 seconds.
- While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
Your SerComm router should now be reset to its brand new factory settings, Check the table to see what those are (Most likely admin/password).
If the factory reset didn't work, check out the SerComm 30 30 30 factory reset guide .
Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).
I still can't access my SerComm router with the default password
Make sure that you have followed the reset instructions correctly as the SerComm routers should always rever to their factory default settings when reset.
Otherwise, there is always the risk that your router is damaged and might need to be repaired or replaced.
