Rosewill Default Usernames & Passwords
The default credentials needed to login to your Rosewill router
Info updated Feb. 17, 2024
The majority of Rosewill routers have a default username of admin, a default password of admin, and the default IP address of 192.168.1.1.
These Rosewill credentials are needed when doing a login to the Rosewill router's web interface to change any settings.
Since some of the models don't follow the standards, you can see those in the table below.
Below the table are also instructions on what to do incase you forget your Rosewill router password, need to reset your Rosewill router to its factory default password, or the password reset doesn't work.
Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.Rosewill default Password List (Valid February 2024)
| Model | Default Username | Default Password | Default IP address |
|
L600N L600N default factory settings |
admin | admin | 192.168.1.1 |
|
RNX-AC750RT RNX-AC750RT default factory settings |
admin | admin | 192.168.1.1 |
|
RNX-EasyN4 RNX-EasyN4 default factory settings |
admin | admin | 192.168.0.1 |
|
RNX-EasyN400 RNX-EasyN400 default factory settings |
admin | admin | 192.168.0.1 |
|
RNX-G40 RNX-G40 default factory settings |
user | user | 192.168.1.254 |
|
RNX-GX4 RNX-GX4 default factory settings |
admin | guest | 192.168.1.1 |
|
RNX-N150RT v1 RNX-N150RT v1 default factory settings |
admin | admin | 192.168.1.1 |
|
RNX-N150RT v2 RNX-N150RT v2 default factory settings |
admin | admin | 192.168.1.1 |
|
RNX-N300RT RNX-N300RT default factory settings |
admin | admin | 192.168.1.1 |
|
RNX-N360RT RNX-N360RT default factory settings |
admin | admin | 192.168.1.1 |
|
|
|||
|
RNX-N4 RNX-N4 default factory settings |
Admin | - | 192.168.1.2 |
|
RNX-N400LX RNX-N400LX default factory settings |
admin | guest | 192.168.1.254 |
|
RNX-N4PS RNX-N4PS default factory settings |
admin | admin | 192.168.0.1 |
|
T600N T600N default factory settings |
admin | admin | 192.168.0.1 |
|
T900N-X T900N-X default factory settings |
admin | admin | 192.168.0.1 |
Instructions and common questions
Forgot your Rosewill router password?
Have you changed the username and/or password of your Rosewill router and forgotten what you changed it to?
Don't worry: all Rosewill routers come with a default factory set password that you can revert to by following the instructions below.
Reset Rosewill router to default password
If you decide to revert your Rosewill router to it's factory defaults, you should do the 30-30-30 reset as follows:
- When your Rosewill router is powered on, press and hold the reset button for 30 seconds.
- While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
Your Rosewill router should now be reset to its brand new factory settings, Check the table to see what those are (Most likely admin/admin).
If the factory reset didn't work, check out the Rosewill 30 30 30 factory reset guide .
Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).
I still can't access my Rosewill router with the default password
Make sure that you have followed the reset instructions correctly as the Rosewill routers should always rever to their factory default settings when reset.
Otherwise, there is always the risk that your router is damaged and might need to be repaired or replaced.
