Nexxt Solutions Default Usernames & Passwords
The default credentials needed to login to your Nexxt Solutions router
Info updated Dec. 10, 2024
The majority of Nexxt Solutions routers have a default username of admin, a default password of admin, and the default IP address of 192.168.0.1.
These Nexxt Solutions credentials are needed when doing a login to the Nexxt Solutions router's web interface to change any settings.
Since some of the models don't follow the standards, you can see those in the table below.
Below the table are also instructions on what to do incase you forget your Nexxt Solutions router password, need to reset your Nexxt Solutions router to its factory default password, or the password reset doesn't work.
Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.Nexxt Solutions default Password List (Valid December 2024)
| Model | Default Username | Default Password | Default IP address |
|
Acrux 1200 (ARL02124U1) Acrux 1200 (ARL02124U1) default factory settings |
admin | admin | 192.168.0.1 |
|
Acrux 300 (ARN03304U1) Acrux 300 (ARN03304U1) default factory settings |
admin | admin | 192.168.0.1 |
|
Acrux 600 (ARN02604U1) Acrux 600 (ARN02604U1) default factory settings |
admin | admin | 192.168.0.1 |
|
Amp 300 (ARN02304U8) Amp 300 (ARN02304U8) default factory settings |
admin | admin | 192.168.0.1 |
|
Kronos 750-AC (AEIEL755U1) Kronos 750-AC (AEIEL755U1) default factory settings |
admin | admin | 192.168.0.1 |
|
Nebula 150 Nebula 150 default factory settings |
admin | admin | 192.168.0.1 |
|
Nebula 150 (ARN01154U1) Nebula 150 (ARN01154U1) default factory settings |
admin | admin | 192.168.0.1 |
|
Nyx1900-AC (ARLGL134U1) Nyx1900-AC (ARLGL134U1) default factory settings |
admin | admin | 192.168.0.1 |
|
Nyx2600-AC (ARLGL174U1) Nyx2600-AC (ARLGL174U1) default factory settings |
admin | admin | 192.168.0.1 |
|
Polaris 150 (ARNPR154U1) Polaris 150 (ARNPR154U1) default factory settings |
admin | admin | 192.168.0.1 |
|
|
|||
|
Sparx 201-W (AELEL204U2) Sparx 201-W (AELEL204U2) default factory settings |
admin | admin | 192.168.0.1 |
|
Viking 150 (ARN01154U4) Viking 150 (ARN01154U4) default factory settings |
admin | admin | 192.168.0.1 |
Instructions and common questions
Forgot your Nexxt Solutions router password?
Have you changed the username and/or password of your Nexxt Solutions router and forgotten what you changed it to?
Don't worry: all Nexxt Solutions routers come with a default factory set password that you can revert to by following the instructions below.
Reset Nexxt Solutions router to default password
If you decide to revert your Nexxt Solutions router to it's factory defaults, you should do the 30-30-30 reset as follows:
- When your Nexxt Solutions router is powered on, press and hold the reset button for 30 seconds.
- While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
Your Nexxt Solutions router should now be reset to its brand new factory settings, Check the table to see what those are (Most likely admin/admin).
If the factory reset didn't work, check out the Nexxt Solutions 30 30 30 factory reset guide .
Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).
I still can't access my Nexxt Solutions router with the default password
Make sure that you have followed the reset instructions correctly as the Nexxt Solutions routers should always rever to their factory default settings when reset.
Otherwise, there is always the risk that your router is damaged and might need to be repaired or replaced.
