Billion Default Usernames & Passwords
The default credentials needed to login to your Billion router
Info updated May 16, 2024
The majority of Billion routers have a default username of admin, a default password of admin, and the default IP address of 192.168.1.254.
These Billion credentials are needed when doing a login to the Billion router's web interface to change any settings.
Since some of the models don't follow the standards, you can see those in the table below.
Below the table are also instructions on what to do incase you forget your Billion router password, need to reset your Billion router to its factory default password, or the password reset doesn't work.
Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.Billion default Password List (Valid May 2024)
| Model | Default Username | Default Password | Default IP address |
|
BiPAC 2073N BiPAC 2073N default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 5200G R4 BiPAC 5200G R4 default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 5200G RC BiPAC 5200G RC default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 5200N RC BiPAC 5200N RC default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 6200NXL BiPAC 6200NXL default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 6300VNOZ BiPAC 6300VNOZ default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 7401VGP R4 BiPAC 7401VGP R4 default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 7402GL R4 BiPAC 7402GL R4 default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 7402GX BiPAC 7402GX default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 7404VGOX BiPAC 7404VGOX default factory settings |
admin | admin | 192.168.1.254 |
|
|
|||
|
BiPAC 7600NX BiPAC 7600NX default factory settings |
admin | admin | 192.168.1.1 |
|
BiPAC 7800NEXL BiPAC 7800NEXL default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 7800VDPX BiPAC 7800VDPX default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 7800VNOX BiPAC 7800VNOX default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 8200N BiPAC 8200N default factory settings |
admin | admin | 192.168.1.254 |
|
BiPAC 8700AX-1600 BiPAC 8700AX-1600 default factory settings |
admin | admin | 192.168.1.254 |
Instructions and common questions
Forgot your Billion router password?
Have you changed the username and/or password of your Billion router and forgotten what you changed it to?
Don't worry: all Billion routers come with a default factory set password that you can revert to by following the instructions below.
Reset Billion router to default password
If you decide to revert your Billion router to it's factory defaults, you should do the 30-30-30 reset as follows:
- When your Billion router is powered on, press and hold the reset button for 30 seconds.
- While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
Your Billion router should now be reset to its brand new factory settings, Check the table to see what those are (Most likely admin/admin).
If the factory reset didn't work, check out the Billion 30 30 30 factory reset guide .
Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).
I still can't access my Billion router with the default password
Make sure that you have followed the reset instructions correctly as the Billion routers should always rever to their factory default settings when reset.
Otherwise, there is always the risk that your router is damaged and might need to be repaired or replaced.
