StarTech Default IP Address List
Instructions to find your StarTech router's IP address
Info updated Oct. 14, 2024
Most StarTech routers have a default IP address of 192.168.0.10.
The IP address is required when accessing the StarTech router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your StarTech router ip if you are connected to the router's network.
Our readers have reported that their StarTech router's have had the following IPs
(more common higher in list)
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most StarTech routers use the same default usernames and passwords so you can also check the Default StarTech password list to try with that one.
StarTech default IP address List (Updated October 2024)
Model | Default IP | Netmask |
PM1115UWGB PM1115UWGB default username & password |
192.168.0.10 Â Open | 255.255.255.0 |
Instructions and common questions
How to find out your StarTech router gateway IP
In case you have changed your StarTech router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find StarTech router ip on Windows
-
Press Win + r
A run prompt should open -
Type
cmd
into the input and press enter
A command prompt will open -
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"
and click enter. - Your Default gateway, probably something like 192.168.0.1, will show
Find StarTech router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
-
Type the following:
ip route | grep default
and press enter. - You will be presented with your StarTech router's IP address
Find StarTech router ip on OSX
-
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal -
Type the following command:
netstat -nr | grep default
and press enter. - Your StarTech router default IP will be shown, something like 192.168.0.1