Netronix Default IP Address List
Instructions to find your Netronix router's IP address
Info updated Dec. 18, 2024
Most Netronix routers have a default IP address of 192.168.1.1.
The IP address is required when accessing the Netronix router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your Netronix router ip if you are connected to the router's network.
Our readers have reported that their Netronix router's have had the following IPs
(more common higher in list)
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Netronix routers use the same default usernames and passwords so you can also check the Default Netronix password list to try with that one.
Netronix default IP address List (Updated December 2024)
Model | Default IP | Netmask |
W141A W141A default username & password |
192.168.100.1 Â Open | 255.255.255.0 |
W242D W242D default username & password |
192.168.1.254 Â Open | 255.255.255.0 |
W430 W430 default username & password |
192.168.1.1 Â Open | 255.255.255.0 |
W440A W440A default username & password |
192.168.1.1 Â Open | 255.255.255.0 |
W441A W441A default username & password |
192.168.1.1 Â Open | 255.255.255.0 |
W443D W443D default username & password |
192.168.1.1 Â Open | 255.255.255.0 |
WB-460 WB-460 default username & password |
192.168.1.1 Â Open | 255.255.255.0 |
Instructions and common questions
How to find out your Netronix router gateway IP
In case you have changed your Netronix router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find Netronix router ip on Windows
-
Press Win + r
A run prompt should open -
Type
cmd
into the input and press enter
A command prompt will open -
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"
and click enter. - Your Default gateway, probably something like 192.168.0.1, will show
Find Netronix router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
-
Type the following:
ip route | grep default
and press enter. - You will be presented with your Netronix router's IP address
Find Netronix router ip on OSX
-
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal -
Type the following command:
netstat -nr | grep default
and press enter. - Your Netronix router default IP will be shown, something like 192.168.0.1