Greenpacket Default IP Address List
Instructions to find your Greenpacket router's IP address

Most Greenpacket routers have a default IP address of 10.1.1.1.

The IP address is required when accessing the Greenpacket router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your Greenpacket router ip if you are connected to the router's network.

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Greenpacket routers use the same default usernames and passwords so you can also check the Default Greenpacket password list to try with that one.

Instructions and common questions

How to find out your Greenpacket router gateway IP

In case you have changed your Greenpacket router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find Greenpacket router ip on Windows

1. Press Win + r
   A run prompt should open
2. Type cmd into the input and press enter
   A command prompt will open
3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
4. Your Default gateway, probably something like 192.168.0.1, will show

Find Greenpacket router ip on Linux

1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
2. Type the following: ip route | grep default and press enter.
3. You will be presented with your Greenpacket router's IP address

Find Greenpacket router ip on OSX

1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
   Or you can press cmd+space and type terminal
2. Type the following command: netstat -nr | grep default and press enter.
3. Your Greenpacket router default IP will be shown, something like 192.168.0.1