1. Home
  2. Default IP addresses
  3. Bellnet

Bellnet Default IP Address List
Instructions to find your Bellnet router's IP address

Info updated March 17, 2024

Most Bellnet routers have a default IP address of 172.16.0.1.

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your Bellnet router's ip address

The IP address is required when accessing the Bellnet router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your Bellnet router ip if you are connected to the router's network.

Our readers have reported that their Bellnet router's have had the following IPs
(more common higher in list)

  • 192.168.1.1
  • 192.168.1.230
  • 192.168.100.1

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Bellnet routers use the same default usernames and passwords so you can also check the Default Bellnet password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

Bellnet default IP address List (Updated March 2024)

Model Default IP Netmask
MB7900
MB7900 default username & password 		172.16.0.1   Open 255.255.255.0

Instructions and common questions

How to find out your Bellnet router gateway IP

In case you have changed your Bellnet router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find Bellnet router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find Bellnet router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your Bellnet router's IP address

Find Bellnet router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your Bellnet router default IP will be shown, something like 192.168.0.1