AsiaRF Default IP Address List
Instructions to find your AsiaRF router's IP address
Info updated Sept. 28, 2023
Most AsiaRF routers have a default IP address of 10.10.10.254.
The IP address is required when accessing the AsiaRF router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your AsiaRF router ip if you are connected to the router's network.
Our readers have reported that their AsiaRF router's have had the following IPs
(more common higher in list)
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most AsiaRF routers use the same default usernames and passwords so you can also check the Default AsiaRF password list to try with that one.
AsiaRF default IP address List (Updated September 2023)
Model | Default IP | Netmask |
AP7628-NN1 AP7628-NN1 default username & password |
10.10.10.254 Â Open | 255.255.255.0 |
Virtu801 Virtu801 default username & password |
192.168.1.254 Â Open | 255.255.255.0 |
Instructions and common questions
How to find out your AsiaRF router gateway IP
In case you have changed your AsiaRF router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find AsiaRF router ip on Windows
-
Press Win + r
A run prompt should open -
Type
cmd
into the input and press enter
A command prompt will open -
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"
and click enter. - Your Default gateway, probably something like 192.168.0.1, will show
Find AsiaRF router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
-
Type the following:
ip route | grep default
and press enter. - You will be presented with your AsiaRF router's IP address
Find AsiaRF router ip on OSX
-
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal -
Type the following command:
netstat -nr | grep default
and press enter. - Your AsiaRF router default IP will be shown, something like 192.168.0.1