AquaMutant Default IP Address List
Instructions to find your AquaMutant router's IP address

Most AquaMutant routers have a default IP address of 192.168.1.1.

The IP address is required when accessing the AquaMutant router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your AquaMutant router ip if you are connected to the router's network.

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most AquaMutant routers use the same default usernames and passwords so you can also check the Default AquaMutant password list to try with that one.

Instructions and common questions

How to find out your AquaMutant router gateway IP

In case you have changed your AquaMutant router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find AquaMutant router ip on Windows

1. Press Win + r
   A run prompt should open
2. Type cmd into the input and press enter
   A command prompt will open
3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
4. Your Default gateway, probably something like 192.168.0.1, will show

Find AquaMutant router ip on Linux

1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
2. Type the following: ip route | grep default and press enter.
3. You will be presented with your AquaMutant router's IP address

Find AquaMutant router ip on OSX

1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
   Or you can press cmd+space and type terminal
2. Type the following command: netstat -nr | grep default and press enter.
3. Your AquaMutant router default IP will be shown, something like 192.168.0.1